SHOWER UPGRADE 101 - BEST PRACTICES FOR NEW UNIT INSTALLATION

Shower Upgrade 101 - Best Practices For New Unit Installation

Shower Upgrade 101 - Best Practices For New Unit Installation

Blog Article

Get Your Estimate Now



Each person has their own individual way of thinking about How to Install a Direct-to-Stud Shower Enclosure.


How to Install a One-Piece Shower Unit
An effective shower installment requires cautious preparation and a lot of job. Most of the times, you will need to do 3 kinds of tasks: mounting wall surfaces, installing the plumbing, and finishing walls.

Different Kinds Of Shower Units


  • Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be linked to the bath faucet based on your need, and the water temperature can be changed by means of the faucets. Push-on mixers are cheap and extremely easy to install. However, although the hose pipe connection is basic, it is conveniently removed. Additionally, it is troublesome to change the temperature.

  • Bath/Shower Mixer: The hose pipe as well as spray of this type of shower are combined with a bath mixer tap, and the temperature can be adjusted with the bath taps. It is a very low-cost choice and no extra plumbing is involved. However, the bath/shower mixers also suffer from troublesome temperature level control choices.

  • Handbook Mixer: The hose pipe as well as spray of a manual mixer shower unit are a part of the wall device and also the cold and hot water materials are linked to a single valve The temperature level and also stress of the water are controlled through either one or a variety of handles (in a lot more costly showers). Although temperature level control is a lot easier in hands-on mixer types, they are more pricey than the formerly pointed out mixers. They likewise require additional plumbing of cold and hot water system pipes.

  • Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall device and the cold and hot water materials are connected to a solitary shutoff below as well. It is complete with an integrated stabiliser to self-adjust the water temperature level and to stop it from coming to be too warm. One of the biggest advantages of a thermostatic mixer shower type consists of practical temperature level control. Nevertheless, it is the most pricey of the different mixer choices.

  • Power Shower: A power shower is a single system including an effective electric pump that is capable of altering both the water stress and temperature level. This type of shower can be fitted if there is water from a cold water cistern and a hot water cyndrical tube. A power shower makes the adjustment of both stress and temperature level easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a combination central heating boiler under mains stress.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it heats the water electrically. It is very important to note that for this shower kind to be mounted, the mains stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system permits the temperature as well as stress to be changed using a knob. Designs with temperature stabilisers are much better as they remain unaffected by other faucets elsewhere being used within the house. A major disadvantage of electrical showers is that the control knob only permits the option of high temperatures at much less stress, or lower temperatures at a better stress. This is problematic in the winter when the spray is usually weak and the mains water is cooler. Nonetheless, this problem is dealt with in some models which are offered with a winter/summer setup.


  • Most Common Errors


  • Violating or disregarding regional code constraints.

  • Using pipes that are too little.

  • Connecting copper to galvanized without making use of a brass or dielectric suitable in between the two.

  • Not utilizing tape or pipeline compound at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not setting up an air space loading for components.

  • Reducing supply stub outs also brief to install the shutoff valves onto after the finished wall is in place.

  • Not correctly lining up tubing into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will cause a leakage.).

  • When transforming the water back on in your house, constantly run the outdoors pipe shutoff or purge your bathrooms to bleed dirt as well as air from the lines. This debris can cause problems in your sink taps as well as other plumbing trim.


  • Preparation.


    Firstly, you must decide on the sort of shower that you desire to mount. It is very important to establish whether the chosen shower is capable of coping with particular systems and can control a secure level of water through the boiler. Most shower devices nowadays are made to be versatile to different water pressures (such as saved warm water as well as cold mains).
    It is additionally crucial to take into account the water pressure and the preparation of the piping as well as drain for the shower.

    Method.


    Relying on the kind of shower you wish to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
    Prior to starting, it is suggested to note the positions of the shower head and also control, and to intend the pipe-work included. Additionally, the water drainage system to get rid of the drainage will require to be prepared. Both positions of the cord route and also the shower switch will certainly likewise need to be taken into consideration if an instant or electrical shower unit is being mounted.
    Use the guideline guide given with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to cut off the water system. In order to protect the pipes, they need to be provided a water-proof covering and additionally fitted with isolating shutoffs. The pipelines can then be hidden into the wall surface and also glued over to neaten the total look.
    Fit the base tray, shower head, and also fittings.
    Link the main shower control to the pipes that will certainly be supplying the water (This may need a women screw thread adapter).
    Reconnect the supply of water and also test the pipes for any kind of leaks, as some may require firm.
    If you are installing an electric shower, bear in mind to turn off the electricity supply prior to making any electrical links. As soon as these connections have been made (there must be advice within the instruction manual), the power supply can be switched back on.

    Adjusting Water Pressure to Fit Your Shower.


    The cold water tank can be raised to a better height (in some cases as low as 150mm (6inches)) by fitting a strong wooden support underneath it - perhaps composed of struts and blockboards. If you pick this option, the main and distribution pipes will certainly additionally need to be elevated to meet the new elevation of the storage tank.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be linked into the power supply in order to run.

    Piping as well as Water drainage.


    It is best to make use of 15mm size supply pipelines, and also make the runs to the shower as short and straight as possible so as to maintain maximum pressure and reduce warmth loss. Additionally, by minimising using arm joints for pipe corners, you can reduce the resistance in the flow of the supply of water. You can accomplish this by bending the pipes instead.

    Most Popular Shower Enclosure Options to Upgrade Your Bathroom


    Frameless Shower Enclosures


    Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.



    Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.


    In-line Shower Options


    Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.



    You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.


    Semi-Frameless Shower Enclosures


    The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.



    Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.



    You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.


    Glass Block Shower Enclosure


    If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.



    You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.



    Final Thoughts



    Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

    https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/


    Simple ways to Install a Shower Cubicle on Your Own

    I am just very interested by How to Install a Direct-to-Stud Shower Enclosure and I'm hoping you enjoyed reading the entry. Enjoyed reading our article? Please share it. Help another person find it. We love reading our article about How to Install a Direct-to-Stud Shower Enclosure.




    Make An Appointment


    Report this page